SALES & TECHNICAL 01751 411965 Mon - Fri 9am - 5pm

Hyco Zen Spa Boiling and Ambient Tap

Excl. Tax: £691.00 Incl. Tax: £829.20

 

The Zen Spa is a 2 in 1 hot and cold drinks station. In the home it replaces the need for a kettle and provides high quality cold (ambient) drinking water. The Zen Spa can be installed over a sink or with the stylish, tempered glass design Zen Font. C.an be used with the Hyco Sapphire undersink chiller for boiling and chilled water. Choice of 3L or 6L tank

Tank Capacity 3 Litres | Tap Dimensions 320 x 224mm (H x W)  | Tank Dimensions 459 x 181 x 220mm (H x Wx D)

* Required

OR
  • Add to Wishlist
  • | Add to Compare
SKU
ZENSPA3L
  • DESCRIPTION

  • Specification

    Outer Casing
    Tap - polished chrome finish 
    Other tap finishes available on request at additional cost
    Tank - durable high impact PC/ABS

    Water Tank
    Stainless steel

    Heating Element
    Stainless steel

    Thermostat
    Electronic to control water up to boiling point

    Insulation
    Highly efficient aerogel thermal insulation

    Initial Draw off
    15 cups/10 mugs based on 167ml cup and 250ml mug.

    Safety
    Overheat temperature protection (manual re-set).

    Safety lock mechanism.

    Supplied expansion vessel and pressure relief valve must be fitted.

    IP Rating
    IPX1

    Installation
    This appliance must be installed in a frost free environment.

    Required hole diameter for mounting tap 32mm – fits in a standard sink.
    Sink/counter top up to 50mm thick.

    The dispensed water temperature can be adjusted down to 98°C on installation if required.

    Plumbing
    Must be installed by a suitably qualified person.

    Intended for connection to the mains water supply.

    Minimum water pressure 1 bar.

    Maximum water pressure 4.2 bar. If higher than this a pressure reducing valve may be required.

    Supplied expansion vessel and pressure relief valve must be fitted.

    Electrical Connection
    Installation must comply with current IEE wiring regulations.

    Supplied with a pre-wired (1m) BS plug.





    Approvals
    CE 

    Standard Warranty

    2 year parts or replacement warranty. Supplied

    scale filter must be fitted and changed every six months otherwise the warranty may be void.