SALES & TECHNICAL 01751 411965 Mon - Fri 9am - 5pm

Hyco Speedflow Undersink 15L Stainless Steel

Excl. Tax: £150.00 Incl. Tax: £180.00

Ideal for use in cloakrooms and kitchens in offices, shops, student accommodation and domestic premises which have been extended and there is no central hot water system near by. One unit located under the kitchen sink is often used to supply hot water for light dish washing in the kitchen sink and hand washing in the cloakroom basin.

Capacity 15 Litres | Power 2kW | Tank Stainless Steel | Dimensions 366 x 366 x 328mm (H x W x D)

OR
SKU
SF15SS
  • DESCRIPTION

  • • 'A' rated energy efficiency
    • 2.0kW element as standard
    • 1.2 and 3.0kW element also available
    • Supplies hot water for up to three basins
    • Neon element on indicator
    • External temperature control with frost protection setting
    • Compact shape suits kitchen undersink cupboard
    • Stainless steel tank
    • Cable pre-wired (1.5m)
    • Can be used with regular taps, including mixers
    • Mains pressure flow rates
    • Accessories may be needed to comply with Water Regulations. Pressure reducing valve required for pressures above 4.2 bar, and expansion vessel and check valve required if cold water draw off nearby. Kits available separately (see Accessories.
    • Optional thermostatic mixing valve available (see Thermostatic Mixing Valve)
    • Not suitable for hair wash basins in hairdressing salons


    Outer Casing
    Easy clean, high impact plastic

    Heating Element
    Stainless steel flange type

    Thermostat
    Bulb type adj. to 75°C

    Water Tank
    Stainless steel

    Anode
    Replaceable grey magnesium (inspect at least annually or more regularly in scale/aggressive water conditions)

    Insulation
    High density polyurethane foam

    Safety
    Overheat temperature protection (manual reset)
    Supplied pressure relief valve must be fitted in every case (set at 6 bar)
    Frost protection if power on
    Optional thermostatic mixing valve to maintain hot water supplied to user at constant, safe temperature

    IP Rating
    IPX4

    Installation
    Site above or below the sink, but inlet and outlet must be at the top
    Floor-standing or wall-mounted

    Plumbing
    Must be installed by a suitably qualified person
    It is recommended that flexible hoses are used for connection to facilitate future maintenance
    Thermal cut-out is located behind the front panel of unit

    Minimum water pressure 0.5 bar
    Maximum water pressure 4.2 bar

    Water connection
    Inlet/outlet 2 x 1/2" BSP male (100mm apart centre to centre)
    Fittings required (not supplied): 2 x 15mm compression to 1/2" BSP female adapter

    Electrical Connection
    Installation must comply with current IET regulations
    The product should be connected to the fixed wiring of the property via a suitably rated isolating switch with a contact separation of at least 3mm in all poles

    Cable pre-wired (1.5m)

    Approvals
    CE, UKCA, WRAS

    Standard Warranty
    5 year tank warranty
    3 year parts or replacement warranty on electrical components