SALES & TECHNICAL Tel: 01751 411965

Hyco SF10K Speedflow Premier Undersink Unvented Water Heater 10L

Hyco SF10K Speedflow Premier Undersink Unvented Water Heater 10L
Excl. Tax: £85.00 Incl. Tax: £102.00

Hyco Undersink Unvented Water Heaters10 litre unvented mains water pressure heater which is suitable for small commercial applications, and offering high performance, multiple sink capability and allow the use of regular taps. External temperature control with neon element-on indicator and manually re-settable thermal cut-out. Glass-lined 2mm steel vessel with magnesium anode. 10L capacity suitable for 1 to 2 sinks. IPX4 (Splashproof) rating.

Capacity 10 Litres | Power 2kW | Tank Glass Lined Steel | Dimensions 410 x 310 x 280mm (H x W x D)

Excl. Tax: £85.00 Incl. Tax: £102.00
 
Description

Details

The Hyco SF10K is a 10 litre unvented mains water pressure heater which is suitable for small commercial applications, and offering high performance, multiple sink capability and allow the use of regular taps. External temperature control with neon element-on indicator and manually re-settable thermal cut-out. Glass-lined 2mm steel vessel with magnesium anode. 10L capacity suitable for 1 to 2 sinks. IPX4 (Splashproof) rating.

Unvented water heaters are fast becoming the option of choice for small commercial applications since they offer high performance, multiple sink capability and allow the use of regular taps. The Hyco Speedflow Premier is a new, stylish unvented water heater packed with useful features:

Product Features:

  • Stylish design
  • Stainless Steel flange element
  • Power-on switch and neon power-on indicator
  • 2.0kW element for rapid heat up
  • 10L capacity suitable for 1 to 2 sinks
  • Continuously adjustable external temperature control 20-75oC
  • Neon element-on indicator
  • Glass-lined 2mm steel vessel with magnesium anode
  • Manually re-settable thermal cut-out
  • Choice of floor standing or wall mounting installation (stainless steel wall mounting bracket included)
  • Pressure relief valve included
  • Maximum working pressure 6bar
  • Thick polyurethane insulation for energy efficiency
  • Anti-shock and anti-static propylene casing
  • Weight 6.5kg
  • IPX4 water ingress rating (splashproof)
  • Conforms to IEC335-2-21 and IEC335-1 CE and RoHS
  • Dimensions 410 x 310 x 280 mm (H x W x D)
  • Supplied with 1.5m of power cable
  • Standby Energy Loss (energy required per day to maintain temperature)= 0.63kWh. Standby energy cost approximately 9p per day assuming 15p per kWh.

Connections on unit:

  • 1/2" Male BSP. Colour coded -- red for hot, blue for cold

Plumbing Fittings required:

  • 2 x 1/2" BSP male for connection to the pressure relief valve
  • 2 x 1/2" BSP female for connection to the unit

Optional stainless steel rear-mounting wall mounted bracket and 6 bar pressure relief valve (above) are both included with the heater.

 


 

  • Accessory Kits

    A cold water accessory kit may be required for this product depending on the details of the installation:

    • If there is suffiucient distance between the water heater and the nearest cold draw off tap, then any expanded warm water is fully contained with the pipework and no accessories are required.

     

     

    • If there is a cold water draw off close to the water heater then it is possible that expanded warm water may mix with cold water flowing to a cold tap. This is quite often the case where a unit is installed under a sink, where the cold water supply to the water heater typically is taken from water supply pipe to the cold tap. In this case a check valve and expansion vessel SF3 kit is required, see Diagram B.  The check valve prevents expanded water flowing towards the cold water draw off point, with expanded water being accommodated in the expansion vessel. 
       
       
       
       
    • If water pressure is unusually high (above 4.2 bar) an SF4 expansion vessel kit (which also incorporating a pressure reduction valve) is required instead. See Diagram C



      Further installation details are provided in the product datasheet.
Additional Information

Additional Information

Datasheet Product Datasheet Link (Opens in New Window)
Warranty 1 Year
SKU SF10K
Capacity (L) 10L
Manufacturer Hyco
Featured Products Best Selling
Power (kW) 1 x 2kW
Plumbing Connections Top (Undersink)
Capacity (L) 10L
Tank Material Glass Lined Steel
Power (kW) 2kW
Reviews

Customer Reviews 1 item(s)

Quick and easy
Quick and easy to install. 10L will supply 1 -2 sinks from a single unit. Ideal for flats etc where there is a separate shower and no cylinder. Review by Simon / (Posted on 11/05/2015)