SALES & TECHNICAL 01751 411965 Mon - Fri 9am - 5pm

Hyco Powerflow Smart 50L WALL HUNG

Excl. Tax: £372.00 Incl. Tax: £446.40

Suitable for hand washing and dish washing where a number of hot water outlets are required such as kitchens, schools, restaurants, washrooms, healthcare environments and offices. The ideal solution for light industrial, commercial and light domestic hot water requirements. Heat up time from 10°C to 60°C 41 minutes. THIS UNIT IS WALL HUNG CONNECTORS ON THE BOTTOM


Capacity 50 Litres | Power 3 kW | Dimensions 762 x 380 x 396 mm (H x W x D)

* Required

OR
  • Add to Wishlist
  • | Add to Compare
SKU
PF50S
  • DESCRIPTION

  • • Slender slimline design

    • Mains pressure flow rates

    • Smart technology gives high energy efficiency

    • Three modes of operation, standard, smart and eco

    • Eco mode at 50°C

    • Erp ratings A 30L, B 50, 80 and 100L

    • Can be used with regular taps, including mixers

    • 3.0 kW element for fast heat up time

    • 1.0 kW option coming soon

    • Digital control panel

    • Neon element on indicator

    • Patented technology ensures incoming cold water does not immediately mix with stored hot water in the tank making more hot water available

    • External electronic temperature control

    • Glass lined tank, 3 year tank warranty

    • Comes complete with unvented accessory kit

    • Optional thermostatic mixing valve available

    • Wall mounted, connections to the base

    • Cable pre-wired (1.5m)

    Standing Loss (kWh/day) 0.78

    TECHNICAL SPECIFICATIONS

    Outer Casing
    White powder coated steel

    Heating Element
    Stainless steel incoloy

    Thermostat
    Electronic 30 - 70°C

    Water Tank
    Glass lined steel

    Anode
    Replaceable grey magnesium anode (inspect at least annually or more regularly in scale/ aggressive water conditions)

    Insulation
    High density polyurethane foam (CFC free)

    Safety
    Overheat temperature protection (manual reset). 
    Factory fitted temperature and pressure relief valve (set at 7 bar 91°C).
    Pressure reducing valve (set at 3 bar).
    Pressure relief valve at 6 bar.
    Use with a thermostatic mixing valve to maintain hot water supplied to user at constant, safe temperature.

    IP Rating
    IPX4

    Installation
    Must be installed vertically with inlet/ outlet connections at base.
    Allow at least 500mm below and 200mm above the heater to facilitate future maintenance.
    Access to the thermal cut-out and element is located at base of unit.

    Unvented Accessory Kit
    Supplied kit must be fitted. 
    Contains expansion vessel with fixing bracket (5L for PF30S & PF50S, 8L for PF80S & PF100S), inlet group, flexible hose and 2 tundishes. 

    Plumbing
    Must be installed by a suitably qualified person.
    Minimum water pressure 1 bar.
    Maximum water pressure to pressure reducing valve 12 bar.
    Working water pressure 3 bar.

    Water Connection
    Inlet/outlet connection 1/2” BSP male. (100mm apart centre to centre) 
    Fittings required (not supplied): 2 x 15mm compression to 1/2” BSP female adapter.

    Electrical Connection
    Installation must comply with current IEE regulations.
    The product should be connected to the fixed wiring of the property via a suitably rated isolating switch with a contact separation of at least 3mm in all poles.

    Approvals
    CE, WRAS, KIWA, Building Regulations

    Standard Warranty
    1 year parts or replacement warranty on electrical components. 
    3 year tank warranty.