SALES & TECHNICAL 01751 411965 Mon - Fri 9am - 5pm

Rinnai HDC1500E Infinity External Multipoint Water Heater 59.5kW | NATURAL GAS

Excl. Tax: £1,761.00 Incl. Tax: £2,113.20

The condensing water heater process delivers up to 105% net thermal efficiency, which translates to significant energy savings when compared to their conventional counterparts.

  • Energy efficient -105% net efficiency*
  • Saves space, water, energy and time
  • Limitless application
  • Compact design with internal and weather-proof
    external models
  • Renewables ready when you are - Suitable for use as a temperature booster for solar thermal and heat-pump
  • Rinnai commercial condensing water heaters are available in both Natural Gas and LPG
  • LPG commercial water heaters are delivered to site LPG enabled.

* In accordance with BS EN 677


Fuel Natural Gas | Power 59.5 kW | Weight 31kg | Dim 723.2 x 470 x 256.9mm (H x W x D) | 

OR
SKU
W1500EKM-NAT
  • DESCRIPTION
  • Specifications

    Installation External
    Fuel Natural Gas or LPG*
    Control Modulating
    Gas consumption
    Natural gas 59.5 kW max
    Propane 58.8 kW max
    Exhaust type Direct forced exhaust(No flue required)
    Ignition Electronic
    Burner Stainless steel
    Low NOx Less than 50ppm
    Height 723.2mm
    Width 470mm
    Depth 256.9mm
    Weight 31 kg
    Water flow rate 1.5** to 37L/min
    Minimum operating pressure 1.0 Bar
    Noise level 50 db(A)
    Connections  
    Gas 3/4 bsp
    Water inlet 3/4 bsp
    Water outlet 3/4 bsp
    Condensate outlet 1/2 bsp
    Electrical Supply 230 AC 50 Hz 1ph

    Additional Information

    Gas Usage 5.7m3
    Gas usage LPG 4.2kg/hr
    Turn down 59.5 - 2.8 kW




     Although there are many DIY tasks you can safely perform at home, unless you are a trained professional, working with gas appliances is not one of them. A Gas Safe registered installer with the required competence to do the particular work should always be used. By law (a) anyone (whether an employer or self-employed) running a business, e.g. a plumber, who carries out work on a gas appliance/fitting must be Gas Safe registered and (b) any individual doing gas work must be competent to do it safely. DIY gas work could be dangerous and is likely to be illegal.