Water Temperature Control:
Having filled the boiler with water, the power may be switched on. The green light will glow to show power is connected to the urn.
To bring water to the boil the thermostat control knob should be turned to the 6 position. When the water starts to boil turn the control knob to approximately setting 5 to keep it simmering.
To maintain the water at any other temperature, set the thermostat control knob (approximately) to one of the following positions:
Setting 1 37 Degs C (99 Degs F)
Setting 2 55 Degs C (131 Degs F)
Setting 3 68 Degs C (155 Degs F)
Setting 4 82 Degs C (180 Degs F)
Setting 5/6 100 Degs C (212 Degs F)
If it is necessary to keep the water at an exact temperature, use a thermometer to check this. Stir the water before taking the temperature and when the desired temperature has been reached, turn the control knob slowly to the left until a click from the thermostat is heard. The thermostat will cycle on and off to maintain the temperature.