Splash guard with two connectors. Enables existing vented taps to be used when a new Streamline unit replaces an earlier Heatrae Sadia undersink water heater.

Flow restrictor should be fitted with Streamline Water Heaters when inlet pressures are above 0.69 bar to limit flow to 7 litres/min.

TXU01 Vented Universal Tap for use with Undersink Vented Water Heaters. These taps are packed individually with both a red and blue bezel and are normally used in cold tap form to match the TXH01.

Basin tap (cold). This is a matching cold tap for Pack S hot tap (970312)

Vented Monobloc Mixer Tap.

Vented mixer can be used with WS7 or Contour 7000 heaters.

TXU02 Vented High Neck (Pillar) Universal Tap for use with Undersink Vented Water Heaters. These taps are packed individually with both a red and blue bezel and are normally used in cold tap form to match the TXH02.

TXH01 Vented Hot Tap for use with Undersink Vented Water Heaters. This tap is constructed to control the flow of incoming mains water supply to an open outlet type electric water heater. This displaces the heated water in an unrestricted flow through the tap’s permanently open outlet. This vented hot tap is for full bore plumbing. Above the basin it is identical to the universal taps, so a matching cold tap is available if required.

Basin tap (hot). A matching cold tap is Pack T (930313)

Monobloc mixer tap.