See Also Time Controllers Counter Top Boiling Water Tap Catering Urns
Sales and Technical 01751 411965
Wall-mounted boiling water heaters are designed for fixed installation, typically over a sink so that minor spillages flow through the sink waste. Hot water drawn off at the tap is automatically replaced by incoming water which is pre-heated to near boiling point to prevent the temperature of the stored water from being lowered. The availability of hot water is essentially determined by the storage capacity of the water heater which should be large enough to meet any peaks in demand. Storage capacity may be estimated by multiplying the number of people who may wish to use the unit at one time by the size of the cups (typically 167mL) or mugs (250mL) used. So if ten people with 250mL mugs are to use the unit at the same time the water heater storage capacity must not be less than 10 x 250mL or 2.5L. The product selection tool below enables user requirements to be estimated. Additional features provided by some products include built-in programmable ON/OFF electronic timers, Eco-Mode which saves energy by switching the unit to operate at half standard capacity during periods of low demand and built-in filtration which simplifies scale control.
Select the product attributes to refine your search.
Instanta Value Range Wall Mounted Water Boiler 2L - 2010 Model
New for 2010, the Instanta WA2N Wall Mounted Water Boiler provides Instanta quality and reliability but with slightly lower specification. The model features a high quality stainless steel cases and front panel electronic status indication via a user-friendly display. Water Byelaws approved and built to Instanta's rigorous quality standards, the WA2N uses advanced electronics which maintains the water at around 97oC. The boiler is insulated for economy and safety, and has a large non drip tap.
Power 2 kW | Initial Draw-Off 2L | Approx Hourly Output 18 L | Dimensions 428 x 254 x 187mm (H x W x D)
Size:
Single
Order Code:
WA2N
Price:
£309.00
Price inc. VAT:
£363.08
Instanta Value Range Wall Mounted Water Boiler 5L - 2010 Model
New for 2010, the Instanta WA5N Wall Mounted Water Boiler provides Instanta quality and reliability but with slightly lower specification. The model features a high quality stainless steel cases and front panel electronic status indication via a user-friendly display. Water Byelaws approved and built to Instanta's rigorous quality standards, the WA5 uses advanced electronics which maintains the water at around 97oC. The boiler is insulated for economy and safety, and has a large non drip tap.
Power 3 kW | Initial Draw-Off 5L | Approx Hourly Output 28 L | Dimensions 432 x 205 x 200mm (H x W x D)
Size:
Single
Order Code:
WA5N
Price:
£324.00
Price inc. VAT:
£380.70
Instanta Wall Mounted Water Boiler Moulded Plastic 3L - 2010 Model
The Instanta WM3 Wall Mounted Moulded Plastic 3L high performance water boiler is the perfect solution when space is at a premium. Designed to last, the models feature non-drip taps. Environmentally friendly features include programmable seven-day timer and high performance thermal insulation. Two year on-site warranty
Power 3 kW | Initial Draw-Off 3L | Approx Hourly Output 28 L | Dimensions 452 x 332 x 208mm (H x W x D)
Size:
Single
Order Code:
WM3
Price:
£356.00
Price inc. VAT:
£418.30
Lincat Wall Mounted FilterFlow Automatic-Fill Water Boiler 9L
Manufactured to the highest standards, Lincat FilterFlow automatic water boilers combine style, function, reliability and value for money with a pioneering new development in water boiler filtration. A water filter is essential, not only in hard water areas to reduce problematic scale build-up, but also to remove impurities that can leave an unpleasant taste. Until now, these filters have always been plumbed in as a separate unit. This is unattractive and adds cost. FilterFlow is ingeniously different. It revolutionises water boiler design by incorporating the filter cartridge within the boiler casing. Built-in scale filter
Power 3 kW | Initial Draw-Off 9L | Approx Hourly Output 31L | Dimensions 652 x 290 x 465mm (H x W x D)
Size:
Single
Order Code:
WALL-EB3F-LIN
Price:
£364.00
Price inc. VAT:
£427.70
Hyco Microboil Standard Autofill Water Boiler 3L
The Microboil is an advanced microprocessor controlled solution to the provision of boiling water for hot drinks in the workplace. Sophisticated electronics make sure that all Microboil units will automatically supply boiling water 24 hours a day, 365 days a year - even when the unit is automatically re-filling after heavy usage.
Power 2.4 kW | Initial Draw-Off 3L | Approx Hourly Output 22 L | Dimensions 370 x 269 x 153mm (H x W x D)
Size:
Single
Order Code:
MBS3
Price:
£399.00
Price inc. VAT:
£468.83
Instanta Wall Mounted Water Boiler Stainless Steel 3L - 2010 Model
The Instanta WM7-3SS Wall Mounted Stainless Steel 3L high performance water boiler is the perfect solution when space is at a premium. Designed to last, the models feature non-drip taps. Environmentally friendly features include programmable seven-day timer and high performance thermal insulation. Two year on-site warranty
Power 3 kW | Initial Draw-Off 3L | Approx Hourly Output 28 L | Dimensions 452 x 332 x 208mm (H x W x D)
Size:
Single
Order Code:
WM3SS
Price:
£399.00
Price inc. VAT:
£468.83
Redring SB2 Autofill Water Boiler - 2.5L
Automatic fill and heat. A single soft touch push-button for on/standby, and a quarter turn rotary tap to dispense boiling water from 97ºC to 100ºC. Three L.E.D.'s indicate power on, unit full and temperature ready.
Microprocessor controlled for water level and accurate temperature control.
Power 2.1 kW | Initial Draw-Off 2.5L | Approx Hourly Output 20 L | Dimensions 352 x 285 x 220mm (H x W x D)
Size:
Single
Order Code:
714401
Price:
£409.00
Price inc. VAT:
£480.58
Instanta Value Range Wall Mounted Water Boiler 10L - 2010 Model
New for 2010, the Instanta WA10N Wall Mounted Water Boiler provides Instanta quality and reliability but with slightly lower specification. The model features a high quality stainless steel cases and front panel electronic status indication via a user-friendly display. Water Byelaws approved and built to Instanta's rigorous quality standards, the WA10N uses advanced electronics which maintains the water at around 97oC. The boiler is insulated for economy and safety, and has a large non drip tap.
Power 3 kW | Initial Draw-Off 10L | Approx Hourly Output 28 L | Dimensions 480 x 340 x 247mm (H x W x D)
Size:
Single
Order Code:
WA10N
Price:
£413.00
Price inc. VAT:
£485.28
Instanta Wall Mounted Water Boiler Moulded Plastic 7L - 2010 Model
The Instanta WM7-3 Wall Mounted Stainless Steel 7L high performance water boiler is the perfect solution when space is at a premium. Designed to last, the models feature non-drip taps. Environmentally friendly features include energy saving ECO mode, programmable seven-day timer and high performance thermal insulation. Two year on-site warranty
Power 3 kW | Initial Draw-Off 7L | Approx Hourly Output 28 L | Dimensions 498 x 350 x 220mm (H x W x D)
Size:
Single
Order Code:
WM7
Price:
£420.00
Price inc. VAT:
£493.50
Lincat Wall Mounted FilterFlow Automatic-Fill Water Boiler 4.5kW 9L
Manufactured to the highest standards, Lincat FilterFlow automatic water boilers combine style, function, reliability and value for money with a pioneering new development in water boiler filtration. A water filter is essential, not only in hard water areas to reduce problematic scale build-up, but also to remove impurities that can leave an unpleasant taste. Until now, these filters have always been plumbed in as a separate unit. This is unattractive and adds cost. FilterFlow is ingeniously different. It revolutionises water boiler design by incorporating the filter cartridge within the boiler casing. Built-in scale filter
Power 4.5 kW | Initial Draw-Off 9L | Approx Hourly Output 31L | Dimensions 652 x 290 x 465mm (H x W x D)
Please note that this unit too powerful for connection to a 13A socket and must be wired to an electrical distribution unit.
Wall-mounted boiling water heaters are designed for fixed installation, typically over a sink so that minor spillages flow through the sink waste. Hot water drawn off at the tap is automatically replaced by incoming water which is pre-heated to near boiling point to prevent the temperature of the stored water from being lowered. The availability of hot water is essentially determined by the storage capacity of the water heater which should be large enough to meet any peaks in demand. Storage capacity may be estimated by multiplying the number of people who may wish to use the unit at one time by the size of the cups (typically 167mL) or mugs (250mL) used. So if ten people with 250mL mugs are to use the unit at the same time the water heater storage capacity must not be less than 10 x 250mL or 2.5L. The product selection tool below enables user requirements to be estimated. Additional features provided by some products include built-in programmable ON/OFF electronic timers, Eco-Mode which saves energy by switching the unit to operate at half standard capacity during periods of low demand and built-in filtration which simplifies scale control. 
Time Controllers
New for 2010, the Instanta WA2N Wall Mounted Water Boiler provides Instanta quality and reliability but with slightly lower specification. The model features a high quality stainless steel cases and front panel electronic status indication via a user-friendly display. Water Byelaws approved and built to Instanta's rigorous quality standards, the WA2N uses advanced electronics which maintains the water at around 97oC. The boiler is insulated for economy and safety, and has a large non drip tap. 
Manufactured to the highest standards, Lincat FilterFlow automatic water boilers combine style, function, reliability and value for money with a pioneering new development in water boiler filtration. A water filter is essential, not only in hard water areas to reduce problematic scale build-up, but also to remove impurities that can leave an unpleasant taste. Until now, these filters have always been plumbed in as a separate unit. This is unattractive and adds cost. FilterFlow is ingeniously different. It revolutionises water boiler design by incorporating the filter cartridge within the boiler casing. Built-in scale filter
The Microboil is an advanced microprocessor controlled solution to the provision of boiling water for hot drinks in the workplace. Sophisticated electronics make sure that all Microboil units will automatically supply boiling water 24 hours a day, 365 days a year - even when the unit is automatically re-filling after heavy usage. 
Automatic fill and heat. A single soft touch push-button for on/standby, and a quarter turn rotary tap to dispense boiling water from 97ºC to 100ºC. Three L.E.D.'s indicate power on, unit full and temperature ready.
Microprocessor controlled for water level and accurate temperature control.
Please note that this unit too powerful for connection to a 13A socket and must be wired to an electrical distribution unit.
